SMH Material Fatigue Test System

FT Series
ST Series

FT Series

  • SMH201 FT Series

    SMH201 FT Series

  • SMH Material Fatigue Test System FT Series

    SMH Material Fatigue Test System FT Series

This versatile test system is equipped with a standard frame and is well-suited for testing materials and other test specimens. The standard type can handle a capacity of up to 200 kN.
*Can also be mounted on the upper crosshead of the actuator

Contact Us

SMH201 FT Series

  Test machine system Type FT Series
FT-2 FT-3 FT-5 FT-10 FT-20
General performance Max. dynamic load ±kN 20 30 50 100 200
Max. static load ±kN 23 35 58 116 230
Max. displacement ±mm 30 or 50
Amplitude characteristic   See under page
Controlled range   Possible up to 4 channels (load, displacement, etc.)
Range selection   Automatic range (8 ranges from x1 to 128)
Static load accuracy   ±0.2% of load cell capacity
Static displacement accuracy   ±0.2% of full stroke
Control stability   ±1.0% of FS in each range
Test machine Road frame Type NFT FTC　
FTB
Rigidity
(at 500mm on cross head table)		 mm/kN NFT＝0.0016　FTB＝0.0012 0.00065
Actuator   EFH-20 EFH-30 EFH-50 EFH-100 EFH-200
Detector Load detector   FLC type (Shearing strain type)
Displacement detector   Differential transformer (with built-in actuator)
Grips Round bar grip Option Split type round bar grip
Hydraulic unit Hydraulic power supply Type HPT-5 HPT-5 HPT-7 HPT-15 HPT-19
Servo valve Type 76-182 76-182 76-182 76-183 76-184
Accumulater Capacity 0.5Ｌ 1L
Controller Controller Full digital controller:Computer control / Manual control(Measuring channels:Max.8 channels)
Full digital controller:Computer control(Measuring channels:Max.8 channels)
Full digital controller:Computer control / Manual control(Measuring channels:Max.4 channels)
SMH201 FTシリーズの性能グラフ

ST Series

  • SMH Material Fatigue Test System ST Series　50kN Material Test System

    SMH Material Fatigue Test System ST Series　50kN Material Test System

With this system, a hydraulic servo actuator is mounted on the upper crosshead. The system is well-suited for testing smaller specimens as well as structures and other larger test specimens. The standard type can handle a capacity of up to 300 Kn.

Contact Us

SMH202 ST Series

  Test machine system Type ST Series
ST-2 ST-3 ST-5 ST-10 ST-20 ST-30
General performance Max. dynamic load ±kN 20 30 50 100 200 300
Max. static load ±kN 23 35 58 116 230 350
Max.displacement ±mm 50 or 100
Amplitude characteristic   See under page
Controlled range   Possible up to 4 channels (load, displacement, etc.)
Range selection   Automatic range (8 ranges from x1 to 128)
Static load accuracy   ±0.2% of load cell capacity
Static displacement accuracy   ±0.2% of full stroke
Control stability   ±1.0% of FS in each range
Test machine Road frame Type ST-10S ST-20S ST-30S
ST-10W ST-20W ST-30W
Rigidity
(at 500mm on cross head table)		 mm/kN 0.002 0.001 0.00067
Actuator   EFH-20 EFH-30 EFH-50 EFH-100 EFH-200 EFH-300
Detector Load detector   FLC type (Shearing strain type)
Displacement detector   Differential transformer (with built-in actuator)
Grips Round bar grip Option Split type round bar grip --
Hydraulic unit Hydraulic power supply Type HPT-5 HPT-7 HPT-15 HPT-22 HPT-45 HPT-55
Servo valve Type 76-182 76-183 76-183 76-184 72-187 72-188
Accumulater Capacity 0.5L 1L 3L
Controller Controller 　Full digital controller:Computer control/Manual control(Measuring channels:Max.8 channels)
Full digital controller:Computer control(Measuring channels:Max.8 channels)
　Full digital controller:Computer control/Manual control(Measuring channels:Max.4 channels)
SMH201 STシリーズの性能グラフ

Material Fatigue Test Systems