CPH Drive Shaft Test System
Drive Shaft Simulator
-
CPH350 Drive Shaft Simulator
This system is designed to comprehensively test durability by replicating the load conditions of actual vehicles. It can also combine other conditions, including transmission torque, rotational speed, vertical wheel movement, and steering angle. Axle data can be input into the CPU to enable combined testing with real-time waveforms.
CPH350 Drive Shaft Simulator
| Rotation velocity range | 200 to 3000rpm |
|---|---|
| Max. torque | ±3000Nm |
| Max. angle | ±45° |
| Max. angular velocity | 200°/s（瞬時） 50°/s（定常） |
| Frequency range | 0.01 to 1Hz |
CPH210-05 C.V.J. Torsional Fatigue test machine
| Max. torque | ±5 kN・m |
|---|---|
| Max. angle | ±50 ° |
| Max. angular velocity | 430 °/s |
| Frequency range | 0.01 to 50Hz |
| Angle setting degree |
R/A side ±30° T/C side 0 to 50° |
CPH210-30 Propeller shaft torsional fatigue test machine
| Max. torque | ±30 kN・m |
|---|---|
| Max. angle | ±50 ° |
| Max. angular velocity | 150 °/s |
| Frequency range | 0.01 to 20Hz |
| Angle setting degree |
R/A side ±30 ° T/C side ±50° |